Skip to main content

RADplus 2024 Update 54

  1. Last updated
  2. Save as PDF

Product Requirements and Recommendations

RADplus required

Recommended Update Level

RADplus 2024 Monthly Release 2024.01.01

Product Update Description

Document Management is updated to support Perceptive capture pages in Avatar NX.

Required Updates

None

Included Updates

None

Details
NEW0 CHANGED0 FIXED1
Fixed (1)
Entity-Based Document Capture - Client ID and Episode
An issue is resolved in "Entity-Based Document Capture" where the client and episode properties can be blank. KB0076455 v0.01
Topics
• Document Capture • Perceptive
 
Acceptance Tests
AV-92182 Summary | Details
Entity-Based Document Capture - Client ID and Episode
Note - These testing guidelines assume the user is skilled in the use of, at a minimum, the following:
  • Batch Capture and Indexing
  • Chart Review
  • Clinical Document Viewer
  • Staff Document Capture
Scenario 1: Perceptive Batch Capture and Indexing - JxBrowser enabled
Specific Setup:
  • Perceptive storage method must be utilized.
Steps
  1. Open the "Batch Capture and Indexing" form.
  2. Click "Capture" to create a new batch.
  3. Choose "Scanner" for the "Source".
  4. Click "Open Batch".
  5. Scan a document
  6. If Batch Verify is utilized, then click "Send To".
  7. If Batch Verify is not utilized, then click "Submit".
  8. If Batch Verify is utilized, select Avatar Batch Validate in the left-hand pane.
  9. Select the batch that was sent to this queue.
  10. Open the batch and click "Submit".
  11. Close form.
  12. Open the "Batch Capture and Indexing" form.
  13. Click "Capture" to create a new batch.
  14. Choose "File" for the "Source".
  15. Click "Browse" and browse to the location of where the file is stored on the server.
  16. Click "Open".
  17. Click "Open Batch".
  18. If Batch Verify is utilized, then click "Send To".
  19. If Batch Verify is not utilized, then click "Submit".
  20. If Batch Verify is utilized, select Avatar Batch Validate in the left-hand pane.
  21. Select the batch that was sent to this queue.
  22. Open the batch and click "Submit".
  23. Close form.
  24. Open "Chart Review" form for the client and episode that the documents were just scanned and imported for.
  25. Navigate to the form/category that you want to validate.
  26. Select a document that was scanned in.
  27. Validate that the document displays.
  28. Click the "Print" button.
  29. Print the document.
  30. Validate that the printed document matches what displayed on the viewer.
  31. Select a document that was imported in.
  32. Validate that the document displays.
  33. Click the "Print" button.
  34. Print the document.
  35. Validate that the printed document matches what displayed on the viewer.
  36. Open "Clinical Document Viewer".
  37. Validate you can view and print both the scanned and imported document.
Scenario 2: Client Document Capture - Validation
Specific Setup:
  • Perceptive storage method must be utilized.
  • A client must be enrolled in an existing episode (Client A).
  • A document must exist for import.
Steps
  1. Access the 'Client Document Capture' form.
  2. Enter "Client A" in the 'Client ID' field.
  3. Select any episode for the 'Episode Number' field.
  4. Click [Launch POS Capture].
  5. Validate a 'Capture Mode' dialog stating: "How would you like to capture documents?"
  6. Click [Import].
  7. Validate the 'Document Capture' opens in a new window.
  8. Select any value in the 'Document Type' field.
  9. Enter any value in the 'Document Description' field.
  10. Click [Capture] and [Browse].
  11. Locate the file to be imported and click [Open] and [Done].
  12. Validate the image displays.
  13. Click [Save].
  14. Validate a message stating: 'Save Was Successful.' and 'Document Added to Avatar!'
  15. Close the form.
  16. Access the undocked 'Clinical Document Viewer' form.
  17. Validate the form opens in a new window.
  18. Select "Client" in the 'Select Type' field.
  19. Select 'Individual' in the 'Select All or Individual Client' field.
  20. Enter "Client A" in the 'Select Client' field.
  21. Select the episode from the previous steps in the 'Episode' field.
  22. Click [Process].
  23. Locate and select the document that was saved in the previous steps.
  24. Validate the image displays.
  25. Click [Close All Documents], [Search] and [Close].
Scenario 3: Staff Document Capture - Validation
Specific Setup:
  • Perceptive storage method must be utilized.
  • There must be a practitioner defined (Practitioner A).
  • A document must exist for import.
Steps
  1. Access the 'Staff Document Capture' form.
  2. Enter "Practitioner A" in the 'Staff ID' field.
  3. Click [Launch POS Capture].
  4. Validate a 'Capture Mode' dialog stating: "How would you like to capture documents?"
  5. Click [Import].
  6. Validate the 'Document Capture' opens in a new window.
  7. Select any value in the 'Document Type' field.
  8. Enter any value in the 'Document Description' field.
  9. Click [Capture] and [Browse].
  10. Locate the file to be imported and click [Open] and [Done].
  11. Validate the image displays.
  12. Click [Save].
  13. Validate a message stating: "Save Was Successful." and "Document Added to Avatar!"
  14. Access the 'Clinical Document Viewer' form.
  15. Select "Staff" in the 'Select Type' field.
  16. Select "Individual" in the 'Select All or Individual Staff' field.
  17. Select "Practitioner A" in the 'Select Staff' field.
  18. Click [Process].
  19. Locate and select the document that was saved in the previous steps.
  20. Validate the image displays.
  21. Click [Close All Documents], [Search] and [Close].
  22. Navigate back to the open 'Staff Document Capture' form.
  23. Click [Launch POS Capture].
  24. Validate a 'Capture Mode' dialog stating: "How would you like to capture documents?".
  25. Click [Import].
  26. Validate a second document capture window opens.
  27. Navigate back to the open 'Staff Document Capture' form.
  28. Click [Discard].
  29. Validate the document capture windows close and the form discards.
Scenario 4: Entity-Based Document Capture - Validation
Specific Setup:
  • Perceptive storage method must be utilized.
  • In the "Document Management Defaults" form, select "Program" in the "Select Entity Types to Allow" field.
  • Select a performing provider and a program for the tests.
Steps
  1. Access the 'Entity-Based Document Capture' form.
  2. Select "Performing Provider" in the 'Entity Type' field.
  3. Enter the desired performing provider in the 'Entity' field in the format of "LAST,FIRST".
  4. Validate the 'Results' field displays the performing provider and select it.
  5. Click [Launch POS Capture].
  6. Import in a document saved as a file on the server.
  7. Validate the document renders on screen.
  8. Select the desired value in the 'Document Type' field.
  9. Enter the desired value in the 'Document Description' field.
  10. Click [Save].
  11. Validate that messages display indicating the document was successfully saved.
  12. Close the form.
  13. Access the 'Clinical Document Viewer' form.
  14. Select "Performing Provider" in the 'Entity' field.
  15. Select "Individual" in the 'Select All or Individual Performing Provider' field.
  16. Select the performing provider from the previous steps in the 'Select Performing Provider' field.
  17. Click [Process].
  18. Validate a row was added for the document that was just saved.
  19. View the document to validate it displays as it was captured.
  20. Close the form.
  21. Access the 'Entity-Based Document Capture' form.
  22. Select "Program" in the 'Entity Type' field.
  23. Enter the desired program in the 'Entity' field.
  24. Validate the 'Results' field displays the program and select it.
  25. Click [Launch POS Capture].
  26. Import in a document saved as a file on the server.
  27. Validate the document renders on screen.
  28. Select the desired value in the 'Document Type' field.
  29. Enter the desired value in the 'Document Description' field.
  30. Click [Save].
  31. Validate that messages display indicating the document was successfully saved.
  32. Close the form.
  33. Access the 'Clinical Document Viewer' form.
  34. Select "Program" in the 'Entity' field.
  35. Select "Individual" in the 'Select All or Individual Performing Program' field.
  36. Select the program from the previous steps.
  37. Click [Process].
  38. Validate a row was added for the document that was just saved.
  39. View the document to validate it displays as it was captured.
  40. Close the form.
Topics
• Document Capture • Perceptive