Skip to main content

Avatar Mobile 2024 Monthly Release 2024.01.02 Acceptance Tests

  1. Last updated
  2. Save as PDF
Update 3 Summary | Details
Dictionary Field Values
Note - These testing guidelines assume the user is skilled in the use of, at a minimum, the following:
  • Form Designer (PM)
  • Form Designer (CWS)
Scenario 1: AvatarNX<>Clinician: Validate the display of dictionary field values changed via "Form Designer"
Specific Setup:
  • Have a form [TestForm] that contains:
  • [FieldA] - a "Single" or "Multiple" select 'Locked' dictionary field with two or more dictionary values defined
  • For this test dictionary values: [ValueA], [ValueB], [ValueC], [ValueD], are defined for [FieldA], which is a "Multiple" select field.(Note: a dictionary field is set as a "Locked" dictionary with prompt "Lock Dictionary Values" set to "Yes")
  • [FieldB] - a "Single" or "Multiple" select 'Un-Locked' dictionary field.
  • For this test, [Avalue], [Cvalue], [Dvalue], [Zvalue], are defined for [FieldB], which is a single-select dictionary. (Note: a dictionary field is set as an "Unlocked" dictionary, with prompt "Lock Dictionary Values" set to "No" in "Table Definition". Unlocked dictionary values always display alphabetically in a dropdown list)
  • Have access to "Form Designer" via AvatarNX to make changes to [TestForm]
Steps
  1. Open "Form Designer"
  2. Select [TestForm] for edit
  3. Select the section containing the testing fields and click [Show Tab]
  4. Navigate to and click on [FieldA] in the form layout
  5. Validate all the field values defined in the set up are present:
  6. [ValueA], [ValueB], [ValueC], [ValueD],
  7. On the left side panel in the "Technical Details" section
  8. Validate all the field values defined for [FieldA]: are listed in the "Option" column
  9. Locate [ValueC] in the column
  10. In the "Show/Hide" column, click the "Both" checkbox, to deselect it
  11. Validate [ValueD] is removed for display from [FieldA], on the form layout, as expected
  12. Locate [ValueC] in the "Option" column
  13. Click and drag [ValueC] above [ValueA] in the column
  14. Validate [ValueC] is now displayed above [ValueA] in [FieldA] on the form layout, as expected
  15. Click the "Radio/Checkbox Layout" field
  16. Select "Horizontal" if the values in [FieldA] are currently displayed vertically or select "Vertical" if the values in [FieldA] are currently displayed horizontally. (For this the values were display vertically)
  17. Validate the field values for [FieldA] on the form layout are displayed as expected
  18. Navigate to and click on [FieldB] in the form layout
  19. On the left side panel in the "General" section
  20. Uncheck the "Visible" setting
  21. Validate [FieldB] is removed from the form layout
  22. Click [Save] to save all changes
  23. Click [Submit] to submit the changes
  24. Open form [TestForm]
  25. Validate [FieldA] displays values
  26. [ValueC], [ValueA] and [ValueB], in that order
  27. Validate the values are displayed horizontally
  28. Validate [ValueD] is not displayed, as expected
  29. Validate [FieldB] is not present on the form, as expected
  30. Close the form
  31. Re-open "Form Designer"
  32. Select [TestForm] for edit
  33. Select the section containing the testing fields and click [Show Tab]
  34. On the left side panel in the "Technical Details" section
  35. Locate [ValueC] in the column
  36. In the "Show/Hide" column, click the "Both" checkbox, to select it
  37. Validate [ValueD] is displayed again in [FieldA], on the form layout, as expected
  38. Locate [ValueC] in the "Option" column
  39. Click and drag [ValueC] below [ValueB] in the column
  40. Validate [ValueC] is now displayed after [ValueB] in [FieldA] on the form layout, as expected
  41. Click the "Radio/Checkbox Layout" field
  42. Select "Horizontal" if the values in [FieldA] are currently displayed vertically or select "Vertical" if the values in [FieldA] are currently displayed horizontally. (For this test, the values are currently displayed horizontally)
  43. Validate the field values for [FieldA] on the form layout are displayed as expected
  44. In the upper right corner, click the "Hidden Elements" dropdown list
  45. select [FieldB]
  46. Validate [FieldB] is returned to form layout
  47. Click [Save] to save all changes
  48. Click [Submit] to submit the changes
  49. Re-open form [TestForm]
  50. Validate [FieldA] displays values
  51. [ValueA], [ValueB], [ValueC] and [ValueD] are displayed and in that order
  52. Validate the values are displayed vertically
  53. Validate [FieldB] is returned to the form
  54. Validate the fields stated in the setup, are all displayed and are in alphabetical order
  55. For this test: [Avalue], [Cvalue], [Dvalue], [Zvalue] are displayed alphabetically, as expected
  56. Close the form
Topics
• Forms Designer
 

Avatar_Mobile_2024_Monthly_Release_2024.01.02_Details.csv