Skip to main content

Avatar CWS 2022 Update 57

  1. Last updated
  2. Save as PDF

Product Requirements / Recommendations

Avatar CWS required
RADplus required

Recommended Update Level

Avatar CWS 2021 Update 53

Product Update Form Description

Task List is enhanced to show 'Addl Instructions' on tasks created from order placed in the Order Entry Console as part of the task description. In addition, the following issues are resolved: 1) If a Task Definition is updated to remove a previously defined 'Task Descripion', that change would not be saved. 2) Duplicate Task Occurrences may be created by the Background Occurrence Generator. 3) An incorrect option is presented in the 'Task Action Event' field in the 'Task Reporting' form. 4) The 'Shift' field may incorrectly allow modification of the field's dictionary directly from the 'Task Frequency' form. 5) Bedboard alerts may not present in the same order as the Client Header.

Included Updates

10

Required Updates

None

Details
NEW1 CHANGED0 FIXED2
New (1)
Task List - 'Addl Instructions' in the Task description
A change is made to include 'Addl Instructions' that were entered during Order Entry in the description of any tasks an Order Code generates.
Value Added: Tasks will include relevant information entered during Order Entry.
Topics
• myAvatar/myAvatar NX • NX • Order Entry Console • Task List
 
Fixed (2)
Task List - Remove "Incomplete" as an option for 'Void Task Action'
A change is made to remove the "Incomplete" option from the 'Task Reporting' form in the 'Void Task Action' section.
Topics
• myAvatar/myAvatar NX • Task List
 
Task List - Various fixes and improvements
The following changes are made for Task List:

A change is made to the Bedboard Alert grouping in Task List to match the ordering of alerts in the Patient Header.

A change is made to ensure the appropriate number of Task Shift-related tasks are generated for extended orders.

A change is made to remove the ability to define new Nursing Shifts in the 'Task Frequency' form.
Topics
• myAvatar/myAvatar NX • Order Entry Console • Task List
 
Acceptance Tests
AV-80004 Summary | Details
Task List - Remove "Incomplete" as an option for 'Void Task Action'
Note - These testing guidelines assume the user is skilled in the use of, at a minimum, the following:
  • Orders This Episode
  • Task Associations
  • Task Definitions
  • Task Event List
  • Task List - Dismiss Task dialog
  • Task Reporting
Scenario 1: Task List - Void Task Action from Task Reporting
Specific Setup:

A client must have an active episode. (Client A)

“Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.

Steps
  1. Access the 'Task Definitions' form.
  2. Select "Add" from the 'Add/Edit Task Definition' field.
  3. Set the 'New Task Code' field to "Dismiss" and press Tab.
  4. Set the 'Task Title' field to "Task to Dismiss" and click [Submit].
  5. Validate a message is displayed that states: "Task Definitions has completed. Do you wish to return to form?" and click [No].
  6. Access the 'Task Associations' form.
  7. Select "Task Definition" from the 'Task Type' field.
  8. Search for and select "Task to Dismiss (Dismiss)" from the 'Task Group/Definition' field.
  9. Select "Add" from the 'Add/Edit/Delete Association' field.
  10. Select "Order Entry" from the 'Order Event' field.
  11. Search for and select "4 WAY SALINE (MULTI INGREDIENT SPRAY) (10) SPRAY NASAL" from the 'Order Code' field.
  12. Click [Update Associations] and [Submit].
  13. Validate a message is displayed that states: "Task Associations has completed. Do you wish to return to form?" and click [No].
  14. Select "Client A" and access the Order Entry Console.
  15. Search for and select "4 WAY SALINE (MULTI INGREDIENT SPRAY) (10) SPRAY NASAL" from the 'New Order' field.
  16. Set the 'Dose' field to "1".
  17. Select "app" from the 'Dose Unit' field.
  18. Select "Every Hour" from the 'Freq' field.
  19. Set the 'Duration' field to "2" and click [Hours].
  20. Set the 'Start Time' field to "0000".
  21. Click [Add to Scratchpad] and [Sign].
  22. Validate the 'Interactions' dialog is displayed.
  23. Override all interactions and click [Save Override and Exit].
  24. Access the 'Task List' widget.
  25. Search for and select "Client A" from the 'Search Patients' field.
  26. Validate that two tasks labeled: "Task to Dismiss" were created and placed under the Overdue column.
  27. Access the 'Task Reporting' form.
  28. Select the 'Dismiss Task' tab.
  29. Set the 'From Date' and 'To Date' fields to the current date.
  30. Search for and select "Client A" from the 'Patient' field.
  31. Select "Incomplete" from the 'Task Status' field.
  32. Select "Task to Dismiss (Dismiss)" from the 'Task Code' field and click [Select Tasks].
  33. Validate a dialog is launched that contains the two overdue tasks.
  34. Select the two tasks and click [OK].
  35. Select "Other" from the 'Reason' field.
  36. Set the 'Reason Text' field to "Patient not in bed" and click [Dismiss].
  37. Access the 'Task List' widget.
  38. Validate that the two tasks labeled: "Task to Dismiss" are removed from the Overdue column.
  39. Access the 'Task Reporting' form.
  40. Select the 'Void task Action' tab.
  41. Set the 'From Date' and 'To Date' fields to the current date.
  42. Search for and select "Client A" from the 'Patient' field.
  43. Search for and select the logged in user from the 'Staff' field.
  44. Select "Task to Dismiss (Dismiss)" from the 'Task Code' field.
  45. Select "Dismissed" from the 'Task Action Event' field and click [Select Task Event].
  46. Validate a dialog is launched that contains the two dismissed tasks.
  47. Select the two tasks and click [OK].
  48. Select "Other" from the 'Void Reason' field.
  49. Set the 'Reason Text' field to "Correction" and click [Void].
  50. Validate a message is displayed that states: "Task voided" and click [OK].
  51. Click [Discard].
  52. Validate a message is displayed that states: "Are you sure you want to Close without saving?" and click [Yes].
  53. Access the 'Task List' widget.
  54. Validate that the two tasks labeled: "Task to Dismiss" are re-added to the Overdue column.
Topics
• myAvatar/myAvatar NX • Task List
AV-80009 Summary | Details
Task List - 'Addl Instructions' in the Task description
Note - These testing guidelines assume the user is skilled in the use of, at a minimum, the following:
  • Orders This Episode
  • Task Associations
  • Task Definitions
Scenario 1: Task List - Include 'Addl Instructions' on a Task created from an Order
Specific Setup:
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'Task Definitions' form.
  2. Select "Add" from the 'Add/Edit Task Definition' field.
  3. Set the 'New Task Code' field to "HasDesc" and press Tab.
  4. Set the 'Task Title' field to "Has a Description".
  5. Set the 'Task Description' field to "This task has a Task Description configured in the Task Definitions form." and click [Submit].
  6. Validate a message is displayed that states: "Task Definitions has completed. Do you wish to return to form?" and click [Yes].
  7. Select "Add" from the 'Add/Edit Task Definition' field.
  8. Set the 'New Task Code' field to "NoDesc" and press Tab.
  9. Set the 'Task Title' field to "No Default Description" and click [Submit].
  10. Validate a message is displayed that states: "Task Definitions has completed. Do you wish to return to form?" and click [No].
  11. Access the 'Task Associations' form.
  12. Select "Task Definition" from the 'Task Type' field.
  13. Search for and select "Has a Description (HasDesc)" from the 'Task Group/Definition' field.
  14. Select "Add" from the 'Add/Edit/Delete Association' field.
  15. Select "Order Entry" from the 'Order Event' field.
  16. Search for and select "WELLBUTRIN 100 MG TABLET ORAL" from the 'Order Code' field.
  17. Click [Update Associations] and [Submit].
  18. Validate a message is displayed that states: "Task Associations has completed. Do you wish to return to form?" and click [Yes].
  19. Select "Task Definition" from the 'Task Type' field.
  20. Search for and select "No Default Description (NoDesc)" from the 'Task Group/Definition' field.
  21. Select "Add" from the 'Add/Edit/Delete Association' field.
  22. Select "Order Entry" from the 'Order Event' field.
  23. Search for and select "WELLBUTRIN 100 MG TABLET ORAL" from the 'Order Code' field.
  24. Click [Update Associations] and [Submit].
  25. Validate a message is displayed that states: "Task Associations has completed. Do you wish to return to form?" and click [No].
  26. Select "Client A" and access the Order Entry Console.
  27. Search for and select "WELLBUTRIN 100 MG TABLET ORAL" from the 'New Order' field.
  28. Set the 'Dose' field to "100".
  29. Select "MG" from the 'Dose Unit' field.
  30. Select "Every 6 Hours" from the 'Freq' field.
  31. Set the 'Duration' field to "28" and click [Days].
  32. Set the 'Addl Instructions' field to "These instructions are entered in the Order Entry Console".
  33. Click [Add to Scratchpad] and [Sign].
  34. Validate the 'Order grid' contains an order for "WELLBUTRIN 100 MG ORAL TABLET, Every 6 Hours".
  35. Validate the 'Addl Instructions' field for the order contains "These instructions are entered in the Order Entry Console.".
  36. Access the 'Task List' widget.
  37. Search for and select "Client A" from the 'Search Patients' field.
  38. Validate that a task labelled: "No Default Description" and "Has a Description" are created and placed under a future hour.
  39. Hover over the "No Default Description" task.
  40. Validate the "No Default Description" task contains the text, "Addl Instructions: These instructions are entered in the Order Entry Console."
  41. Hover over the "Has a Description" task.
  42. Validate the "Has a Description" task contains the text, "This task has a Task Description configured in the Task Definitions form. Addl Instructions: These instructions are entered in the Order Entry Console."
Topics
• myAvatar/myAvatar NX • NX • Order Entry Console • Task List
AV-80186 Summary | Details
Task List - Various fixes and improvements
Note - These testing guidelines assume the user is skilled in the use of, at a minimum, the following:
  • CarePOV Management
  • Orders This Episode
  • Task Associations
  • Task Definitions
  • Task Frequency
  • Task Shift
  • Update Client Data
  • Frequency Code Setup
  • Order Code Setup
  • Order Entry User Definition
Scenario 1: OE NX - New Order - Administration Method "IV Primary (Continuous)"
Specific Setup:
  • The following extended attributes must be set in the Order Entry Client Information '(20969) Administration Method' dictionary for “IVPR”:
  • ‘(20990) Preferred Description’ = “IV Continuous”
  • ‘(20991) Show Diluent’ = “No”
  • ‘(20992) Require Diluent’ = “No”
  • '(20993) Allow Selection' = "Yes"
  • '(20995) Show Additive Prompts' = "Yes"
  • '(20996) Applicable Routes' = "INTRAVENOUS"
  • Please log out of the application and log back in after completing the above configuration.
  • In the 'Order Code Setup' form the 'Additive Component' checkbox must be checked in the 'Is an IV Additive Component' field for the "DOPAMINE HCL 160 MG/1 ML SOLUTION INTRAVENOUS" order code.
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'CarePOV Management' form.
  2. Select the 'Client Alerts' tab.
  3. Select "Edit" from the 'Add or Edit Alert' field.
  4. Select "Continuous Order (15)" from the 'Client Alert' field.
  5. Validate "Yes" is selected from the 'Active' field.
  6. Validate "Continuous Order" is selected from the 'Alert Type' field.
  7. Select "Yes" from the 'Include in Client Header' field and click [Save].
  8. Validate a message is displaying that states: "Saved." and click [OK].
  9. Close the form.
  10. Select "Client A" and access the Order Entry Console.
  11. Search for and select "Dextrose et DEXTROSE 5% Solution INTRAVENOUS" from the 'New Order' field.
  12. Set the 'Dose' field to "500".
  13. Select "mL" from the 'Dose Unit' field.
  14. Select "Continuous" from the 'Freq' field.
  15. Select "IV Continuous" from the 'Admin Method' field.
  16. Select "DOPAMINE HCL" from the 'Additive' field.
  17. Set the 'Additive Dose' field to "800".
  18. Select "MG" from the 'Additive Dose Unit' field.
  19. Select "As Directed" from the 'Rate Unit' field.
  20. Validate the 'Rate Amount' field contains "As Directed".
  21. Set the 'Volume Amount in ML' field to "800".
  22. Set the 'Duration' field to "28" and click [Days].
  23. Click [Add to Scratchpad] and [Sign].
  24. Validate the 'Order grid' contains an order for "Dextrose et DEXTROSE 5% INTRAVENOUS Solution Additive: DOPAMINE HCL 800 MG 500 mL, Continuous".
  25. Access the 'Task List' widget.
  26. Search for and select "Client A" from the 'Search Patients' field.
  27. Validate that the 'Client Card' contains a "Continuous Order" 'Bedboard Alert'.
Scenario 2: Task List - Creating an Unscheduled Task based on Task Shift frequencies
Specific Setup:
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'Task Shift' form.
  2. Select "Add" from the 'Add/Edit Shift Definition' field.
  3. Set the 'New Shift Code' field to "Nurse" and press [TAB].
  4. Set the 'Shift Description' field to "Nursing Shifts".
  5. Set the 'Shift 1 Start Time' field to "0800" and press [TAB].
  6. Set the 'Shift 2 Start Time' field to "1600" and press [TAB].
  7. Set the 'Shift 3 Start Time' field to "0000" and press [TAB].
  8. Validate the 'Shift 1 End Time' field contains "1559".
  9. Validate the 'Shift 2 End Time' field contains "2359".
  10. Validate the 'Shift 3 End Time' field contains "0759".
  11. Click [Submit].
  12. Validate a message is displayed that states: "Task Shift has completed. Do you wish to return to form?" and click [No].
  13. Access the 'Task Frequency' form.
  14. Select "Add" from the 'Add/Edit Frequency' field.
  15. Set the 'New Task Frequency Code' field to "Nurse" and press [TAB].
  16. Set the 'Task Frequency Description' field to "Nursing Shifts".
  17. Select "Shift" from the 'Type of Frequency' field.
  18. Select "Nursing Shifts (Nurse)" from the 'Shift' field and click [Submit].
  19. Validate a message is displayed that states: "Task Frequency has completed. Do you wish to return to form?" and click [No].
  20. Access the 'Task Definitions' form.
  21. Select "Add" from the 'Add/Edit Task Definition' field.
  22. Set the 'New Task Code' field to "Shift" and press [Tab].
  23. Set the 'Task Title' field to "Nurse Shift Example".
  24. Select "Yes" from the 'Override Originating Task Details' field
  25. Select "Nursing Shifts (Nurse)" from the 'Default Frequency' field.
  26. Set the 'Default Duration' field to "1".
  27. Select "Days" from the 'Default Duration (Units)' field and click [Submit].
  28. Validate a message is displayed that states "Task Definitions has completed. Do you wish to return to form?" and click [No].
  29. Access the 'Task Associations' form.
  30. Select "Task Definition" from the 'Task Type' field.
  31. Search for and select "Nurse Shift Example (Shift)" from the 'Task Group/Definition' field.
  32. Select "Add" from the 'Add/Edit/Delete Association' field.
  33. Select "Order Entry" from the 'Order Event' field.
  34. Search for and select "PRILOSEC 10 MG/1 PACKET ORAL" from the 'Order Code' field.
  35. Click [Update Associations] and [Submit].
  36. Validate a message is displayed that states "Task Associations has completed. Do you wish to return to form?" and click [No].
  37. Select "Client A" and access the Order Entry Console.
  38. Search for and select "PRILOSEC 10 MG/1 PACKET ORAL" from the 'New Order' field.
  39. Set the 'Dose' field to "1".
  40. Select "Tablet" from the 'Dose Unit' field.
  41. Select "EVERY DAY" from the 'Freq' field.
  42. Set the 'Duration' field to "1" and click [Days].
  43. Complete any other required fields and click [Add to Scratchpad] and [Sign].
  44. Access the 'Task List' widget.
  45. Search and select "Client A" from the 'Search Patients' field.
  46. Validate that one task labeled: 'Nurse Shift Example' is displayed and placed under the Unscheduled column based on the current time.
Scenario 3: Task List - Bedboard Alert setup for Task List widget through CarePOV Management
Specific Setup:
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'CarePOV Management' form.
  2. Select the 'Client Alerts' tab.
  3. Select "Edit" from the 'Add or Edit Alert' field.
  4. Select "New Orders (1)" from the 'Client Alert' field.
  5. Validate "Yes" is selected from the 'Active' field.
  6. Validate "New Order" is selected from the 'Alert Type' field.
  7. Select "Yes" from the 'Include in Client Header' field and click [Save].
  8. Validate a message is displayed that states: "Saved." and click [OK].
  9. Select "Edit" from the 'Add or Edit Alert' field.
  10. Select "Stat Orders (2)" from the 'Client Alert' field.
  11. Validate "Yes" is selected from the 'Active' field.
  12. Validate "Stat Order" is selected from the 'Alert Type' field.
  13. Select "Yes" from the 'Include in Client Header' field and click [Save].
  14. Validate a message is displayed that states: "Saved." and click [OK].
  15. Select "Edit" from the 'Add or Edit Alert' field.
  16. Select "Pregnant (11)" from the 'Client Alert' field.
  17. Validate "Yes" is selected from the 'Active' field.
  18. Validate "Pregnancy" is selected from the 'Alert Type' field.
  19. Select "Yes" from the 'Include in Client Header' field and click [Save].
  20. Validate a message is displayed that states: "Saved." and click [OK].
  21. Close the form.
  22. Select "Client A" and access the 'Update Client Data' form.
  23. Validate "Female" is selected from the 'Sex' field.
  24. Select "Pregnant" from the 'Pregnancy Status' field and click [Submit].
  25. Access the Order Entry Console.
  26. Search for and select "ADVIL MIGRAINE 200 MG CAPSULE, LIQUID FILLED ORAL" from the 'New Order' field.
  27. Set the 'Dose' field to "1".
  28. Select "Tablet" from the 'Dose Unit' field.
  29. Select "TWICE A DAY" from the 'Freq' field.
  30. Set the 'Duration' field to "1" and click [Days].
  31. Click [Add to Scratchpad]
  32. Search for and select "Lisinopril 5 MG Tablet ORAL" from the 'New Order' field.
  33. Set the 'Dose' field to "1".
  34. Select "TABLET" from the 'Dose Unit' field.
  35. Select "STAT" from the 'Freq' field.
  36. Validate the 'Duration' field contains "1" and [Days] is selected.
  37. Click [Add to Scratchpad] and [Sign].
  38. Validate the 'Order grid' contains an order for "ADVIL MIGRAINE 200 MG CAPSULE, LIQUID FILLED Tablet, TWICE A DAY".
  39. Validate the 'Order grid' contains an order for "Lisinopril 5 MG ORAL Tablet, STAT".
  40. Access the 'Task List' widget.
  41. Search for and select "Client A" from the 'Search Patients' field.
  42. Validate a 'Pregnancy' alert is displayed for the selected patient.
  43. Validate a 'New Orders' alert is displayed for the "Advil Migraine" order.
  44. Validate a 'Stat Orders' alert is displayed for the "Lisinopril" order.
Scenario 4: Task List - Creating a Scheduled Task using Interval Frequency
Specific Setup:
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'Task Definitions' form.
  2. Select "Add" from the 'Add/Edit Task Definition' field.
  3. Set the 'New Task Code' field to "E2H" and press [Tab].
  4. Set the 'Task Title' field to "Every Two Hours, Interval" and click [Submit].
  5. Validate a message is displayed that states "Task Definitions has completed. Do you wish to return to form?" and click [No].
  6. Access the 'Task Associations' form.
  7. Select "Task Definition" from the 'Task Type' field.
  8. Search for and select "Every Two Hours, Interval (E2H)" from the 'Task Group/Definition' field.
  9. Select "Add" from the 'Add/Edit/Delete Association' field.
  10. Select "Order Entry" from the 'Order Event' field.
  11. Search for and select "RITALIN 10 MG TABLET ORAL" from the 'Order Code' field.
  12. Click [Update Associations] and [Submit].
  13. Validate a message is displayed that states "Task Associations has completed. Do you wish to return to form?" and click [No].
  14. Select "Client A" and access the Order Entry Console.
  15. Search for and select "RITALIN 10 MG TABLET ORAL" from the 'New Order' field.
  16. Set the 'Dose' field to "1".
  17. Select "MG" from the 'Dose Unit' field.
  18. Select "Every 2 Hours" from the 'Freq' field.
  19. Set the 'Duration' field to "6" and click [Days].
  20. Complete any other required fields and click [Add to Scratchpad] and [Sign].
  21. Validate the 'Interactions' dialog is displayed.
  22. Override any interactions and click [Save Override and Exit] button.
  23. Access the 'Task List' widget.
  24. Search and select "Client A" from the 'Search Patients' field.
  25. Validate that three "Every Two Hours, Interval" tasks were created; the first task under the current hour, the second task two hours in the future, and the third task four hours in the future.
Scenario 5: Task List - Bedboard Alert - Continuous Orders (Medical Food)
Specific Setup:
  • The following extended attributes must be set in the Order Entry Tabled Files ‘(500) Order Types’ dictionary for “Medical Food”:
  • ‘(501) Order Type Category’ = “Pharmacy”
  • ‘(506) Default Orders To Open-Ended When No Default Duration’ = “Yes”
  • ‘(560) Is This a Medical Food Order Type’ = “Yes”
  • ‘(10181) Route of Administration’ = “GASTROSTOMY TUBE”, "J-TUBE", "NASOGASTRIC", "TUBE FEED", "INTRAVENOUS"
  • Please log out of the application and log back in after completing the above configuration.
  • An 'Order Code' must exist with an 'Order Type' of "Medical Food" and a 'Route of Administration' of "Tube Feed". (Medical Food)
  • A client must have an active episode. (Client A)
  • “Client A” must have a ‘Date of Birth’, ‘Sex’ and address on file in the ‘Update Client Data’ form, as well as information filed in the ‘Allergies and Hypersensitivities’ form, ‘Diagnosis’ form, and in the ‘Height’ and ‘Weight’ fields in the ‘Vitals Entry’ form.
Steps
  1. Access the 'CarePOV Management' form.
  2. Select the 'Client Alerts' tab.
  3. Select "Edit" from the 'Add or Edit Alert' field.
  4. Select "Continuous Order (15)" from the 'Client Alert' field.
  5. Validate "Yes" is selected from the 'Active' field.
  6. Validate "Continuous Order" is selected from the 'Alert Type' field.
  7. Select "Yes" from the 'Include in Client Header' field and click [Save].
  8. Validate a message is displaying that states: "Saved." and click [OK].
  9. Close the form.
  10. Select "Client A" and access the Order Entry Console.
  11. Search for and select "Medical Food" from the 'New Order' field.
  12. Select "EVERY DAY" from the 'Freq' field.
  13. Validate the 'Route' field contains "TUBE FEED".
  14. Select "Pump" from the 'Admin Method' field.
  15. Validate the 'Rate Unit' field contains "mL/hr".
  16. Set the 'Rate Amount' field to "1".
  17. Set the 'Duration' field to "3" and click [Days].
  18. Click [Add to Scratchpad] and [Sign].
  19. Validate the 'Interactions' dialog is displayed.
  20. Override all interactions and click [Save Override and Exit].
  21. Validate the 'Order grid' contains an order for "Medical Food Tube Feed Pump Rate: 1 mL/hr EVERY DAY".
  22. Access the 'HomeView' and deselect "Client A".
  23. Select "Client A" and access the Order Entry Console.
  24. Validate the 'Client Header' contains a 'Client Alert' with an infinity symbol.
  25. Validate when hovering over the 'Client Alert' that a message is displayed that states: "Continuous Order (Medical Food)".
  26. Access the 'Task List' widget.
  27. Search for and select "Client A" from the 'Search Patients' field.
  28. Validate that the 'Client Card' contains a "Continuous Order" 'Bedboard Alert'.
Topics
• myAvatar/myAvatar NX • Order Entry Console • Task List

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Page type
    Reference
  2. Tags
    1. content:release
    2. llm-no-index
    3. role:sysadmin
    4. search:ready